Efficient optimization methodology for laser powder bed fusion parameters to manufacture dense and mechanically sound parts validated on AlSi12 alloy

Publication type: 
Article
Author(s): 
Julie Gheysen, Matthieu Marteleur, Camille van der Rest, Aude Simar
Citation: 

Gheysen, J., Marteleur, M., van der Rest, C., Simar, A. (2021) Efficient optimization methodology for laser powder bed fusion parameters to manufacture dense and mechanically sound parts validated on AlSi12 alloy. Materials & Design, Volume 199, 109433. https://doi.org/10.1016/j.matdes.2020.109433

Description: 

Abstract : The main drawback of laser powder bed fusion (L-PBF), commonly called selective laser melting (SLM) is the high porosity which may lead to an early failure of the parts. To minimize it, the L-PBF parameters need to be optimized focusing on the laser power, scanning speed and hatching space. However, no standard guideline exists. In this study, an efficient and cost-effective methodology is developed and validated on AlSi12. This innovative methodology brings together single scan tracks (SST), macroscopic properties analysis and design of experiments (DOE). It requires three batches of SST, cubes and tensile samples. The DOE significantly decreases the manufacturing and characterization costs. 9 SST are sufficient to identify a process window that is 85% similar to the one obtained from a full factorial design with 105 SST. This process window reliably leads to high densities and better mechanical properties in comparison to the state-of-the-art properties reported in the literature for L-PBF AlSi12. In conclusion, a methodology using only 9 SST, 18 cubes and 12 tensile tests has been validated on AlSi12. It is further envisioned to optimize the L-PBF parameters of any existing or new alloy leading potentially towards better mechanical properties than the state-of-the-art in the literature.

Keywords : Laser powder bed fusion (L-PBF), Selective laser melting (SLM), Parameters optimization, Methodology, Design of experiments (DOE), Aluminum alloy

Year of publication : 
2021
Magazine published in: 
Materials & Design